284 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Cancel Session and Reboot Remote Devices
Figure 3-202 Cancel Remote Session and Reboot Remote Devices options
To cancel an active remote reprogramming or web proxy session, expand the Cancel Session menu and
click Perform Action.
Reboot Remote Devices sends a request across the selected interface for all Orbit units on the network to
reboot to the specified image version. The Remote Management Service must be enabled on each remote
radio in order for them to receive the request.
Interface – The network interface on which to transmit the reboot request. If a desired
network interface is present in a bridge, you must enter the bridge’s name in this field.
Image Version – Select either onboard firmware version. Each remote Orbit unit that receives
the request will reboot to this version of firmware if it is present. If the remote unit does not
currently have the specified firmware version, it will ignore the reboot request.
To Next Page
Loading...
