176 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Figure 3-90. Verify Image Monitoring
The verification status contains the following items:
Current State – The status of the verification task:
- inactive
- processing
- complete
- failure
Detailed Message – The details regarding the operation, such as “Verifying host firmware
image”
Size – The total number of bytes in the image (not displayed on the web UI)
Bytes Transferred – The number of bytes already processed (not displayed on the web UI)
Percent Complete – The percentage complete for the operation
To view the status of the verification process in the CLI, ensure the CLI is in operational mode and then
follow the example below:
> show system firmware verify-image-status
system firmware verify-image-status state complete
system firmware verify-image-status detailed-message “Successfully verified host
firmware image”
system firmware verify-image-status size 38043384
system firmware verify-image-status bytes-transferred 38043384
system firmware verify-image-status percent-complete 100
Configuring - Copy
To copy the active firmware image to the inactive firmware image, navigate to the Copy Image section
and click on the Begin Copying button to begin.
To Next Page
Loading...
