256 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Any VPN connection setup through the wizard can be modified/deleted using the wizard as well by
choosing the “Modify Existing Configuration” option at the start of the wizard. The VPN wizard is
designed to simplfy configuration of common VPN use cases. However, in case one needs to configure
some advanced setup or manipulate parameters that are not available for configuration in the wizard, one
can navigate to Services->VPN to get full access to VPN service configuration:
Figure 3-171. VPN – Service Configuration
The IKE panel includes configuration for IKE policy and peer settings. When VPN wizard is used for
configuration, it automatically configures the IKE policy (<name>_<type>_ike_policy), IKE peer
(<name>_<type>_ike_peer) based on specified VPN name.
To Next Page
Loading...
