GE MDS ORBIT ECR User Manual

MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 279
Figure 3-197. Accessing the SNMP menu
Click Add an Entry next to IPv4 Bind IPs or IPv6 Bind IPs in the Agent submenu to access a
dropdown box containing all IP addresses on the device. Select the IP address belonging to the
appropriate interface, and click Add. Once configuration is complete, click Save.
Web UI - SSH Configure
To configure SSH to listen only to a specific address, navigate to SSH Server ---> Basic Config.
Figure 3-198. SSH Menu
 Enabled - Whether or not to run the netconf server. Default = true
 Port - The port to listen to netconf connections on. Default=830
 IPv4 Bind IPs - Restrict the server to only listen for connections on the specified IPv4 addresses. If
not present, or empty, the server will listen on all IPv4 addresses.
 IPv6 Bind IPs - Restrict the server to only listen for connections on the specified IPv6 addresses. If
not present, or empty, the server will listen on all IPv6 addresses.

GE MDS ORBIT ECR Specifications

General

Brand	GE
Model	MDS ORBIT ECR
Category	Network Router
Language	English