GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-125
iLinq IP Save/Restore
The iLinq IP Save/Restore utility, which is accessed from the System Configuration window (under the
Technical Support Tab), will allow you to save the iLinq IP settings to the hard disk, as described below.
iLinq IP Save Procedure:
1) In the System Configuration window, click on the Technical Support tab - see Figure 7-99 below.
2) Trackball to iLing Settings: Save and press Select.
The system saves the presets to the disk.
3) T
RACKBALL to OK and press Select. The scanning screen is re-displayed.
Figure 7-99 Technical Support Tab
To Next Page
Loading...
