GE MEDICAL SYSTEMS
D
IRECTION 2392751-100, REVISION 3VIVID™ 4 SERVICE MANUAL
8-132 Section 8-8 - Peripherals
3.) Connect the Panasonic VCR RS-323 adaptor (Part No. 066E8200) to the RS-232C cable, and then
to the RS-323 socket on the rear of the VCR, as shown in Figure 8-126 below.
4.) Connect the Audio and S-Video IN and OUT cables, and the Power cable (also shown in Figure 8-126).
Figure 8-126 Panasonic VCR Connection Cables
S-VIDEO IN cable
From: I nternal IO Module, Connector A11
To: S-Video In put
S-VIDEO OUT cable
From: Internal IO Module, Connector A10
To: S-Video O u t put
Power cable
From: Dist ribution box
To: AC IN
AUDIO IN cable
From: Internal IO Module:
To: S-Video I nput:
RED: Connector A9
BLACK: Connector A8
RED: CH1
BLACK: CH2
AUDIO OU T cable
From: Internal IO Module:
To: S-Video O ut put:
RED: Connector A7
BLACK: Connector A6
RED: CH1
BLACK: CH2
RS-232C cable
From: Internal IO Module, Connector A2
To: RS-232C Input
Ground:
From the system chassis
DER
KC
A
LB
DER
K
CAL
B
RS-232C Adaptor
To Next Page
Loading...
