HI Sec THOR - Page 78

THOR Access Control
October 1, 1995 18-006/081-04 GB
78
Important!!
The screen from the two cables must be connected together in the junction box when using the
90T RKP ERC.
When the junction box is opened the small tap in the cover must be cut and the tamper contact must be
removed. In stead the small cable clamp must be fixed in the holes from the removed tamper contact. In the
cable clamp the screen from the two cables can be connected together.
Technical data
Stock number:
Magstripe reader head
.... ........ .......... ......... .......... .........
90T EMR-S
Supply voltage
...... .......... ......... ........ .......... ......... .......... .........
5V DC (from terminal)
Current consumption
....... ......... ........ .......... ......... .......... .........
Max. 20 mA
Cable Length:
...... .......... ......... ........ .......... ......... .......... .........
Max. 50m - shielded, twisted pair.
Temperature range
.......... ......... ........ .......... ......... .......... .........
-20
0
C - +60
0
C
Humidity
...... ......... .......... ......... ........ .......... ......... .......... .........
Unlimited, also condensing.
90T RKP / 95T ERC Terminal hardware interface
.. .......... .........
Magnetic