Hioki 3174 - Page 175

9.4 Message Reference
169
99
Enables/disables and Queries the test time for insulation-resistance tests
Syntax
(Command)
:INSulation:TIMer <ON/ OFF>
Enables and disables the test time for insulation-resistance tests, in
the READY state.
(Query)
:INSulation:TIMer?
Queries the test time enablement for insulation-resistance tests.
(Response)
<ON/ OFF>
Example
(Command)
:INSulation:TIMer ON
Enables the test time for an insulation-resistance test.
(Query)
:INSulation:TIMer?
(Response)
OFF
The test time is set to OFF.
Error
The execution of this command in a state other than the READY state or "test set-
ting state" causes an execution error.
Enables/disables and Queries the delay time for insulation-resistance tests
Syntax
(Command)
:INSulation:DELay <ON/ OFF>
Sets the delay time ON/OFF for insulation-resistance tests in the
READY state.
(Query)
:INSulation:DELay?
Queries the delay time ON/OFF for insulation-resistance tests.
(Response)
<ON/ OFF>
Example
(Command)
:INSulation:DELay ON
Sets the delay time for insulation-resistance tests to ON.
(Query)
:INSulation:DELay?
(Response)
OFF
The delay time is set to OFF.
Error
The execution of this command in a state other than the READY state or "test set-
ting state" causes an execution error.