5.4 Display
No. Function Explanation
5 Outreach of jib The length of the jib.
Note
Only shown if the jib is installed.
6 Angle of jib The angle between the jib and the horizontal.
Note
Only shown if the jib is installed.
7 Hoisting height Total height of the hook above the bottom of the tracks.
8 Maximum load The maximum load that the crane can lift at this outreach and angle.
9 Load weight The current load hanging from the lifting hook.
10 Errors and warnings All errors and warnings are displayed here. An error has a red
background, a warning has a yellow background.
Caution
The crane will not continue with an error, you must
move the crane back to safety before you can
continue.
Note
Use the UP/DOWN arrow keys on the controller to
scroll between messages.
Use the LEFT/RIGHT arrow keys on the controller for
more information
11 Load percentage (Current load / maximum load) x 100%
Green 0 -90% Safe working load.
Yellow 90 - 100% Safe working load.
The crane speed decreases.
Red Above
100%
The load is more than the safe working load of
the crane.
Do not continue working.
You must move the crane back to safety
immediately.
12 Outreach radius The horizontal distance between the center of the slewing ring and the
tip of the jib.
13 Angle of boom The angle between the boom and the horizontal.
14 Counterweight position The extended position of the counterweight in mm.
Note
Only shown if the counterweight is installed.
User guide - C30e Compact crane 55
To Next Page
Loading...