Honeywell Experion C300 - Peer Communications Tab

CEEC300 Function Block
Peer Communications tab
R301.1 Experion C300 Controller User's Guide 117
11/06 Honeywell
Peer Communications tab
The Peer Communications tab contains information about peer connections. It gives
statistics for connections initiated by the CEEC300 block and connections on which the
CEEC300 responds. The following table summarizes the parameter data you can monitor
on the Peer Communications tab of the configuration form for the selected CEEC300
block.
Plain Text Parameter Name
User
Configurable
Notes
Initiator Connections
Target Name
IPEERNAME [ ]
No
Shows the name of the
peer initiator.
Target Path
IPEERPATH [ ]
No
The peer initiator’s
Automation System
Architecture (ASA)
path.
Connection Status
IPEERCONNSTS [ ]
No
The peer initiator
connection status.
Connection Error
Code
IPEERCONNERRCOD
E [ ]
No
The ICP/ASA error
returned on an open
connection attempt.
Extended Error Info
IPEERCONNERRINFO
[ ]
No
The ICP/ASA extended
error information
returned on an open
connection attempt.
Responder Connections
Originator Name
RPEERNAME [ ]
No
Name of the CPM,
ACE, FIM, or IOLINK
peer originator block.
Average Get Rate
CPEERAVGPPSCONN
[ ]
No
The average number of
peer parameters/sec
processed by the CEE.