R301.1 Experion C300 Controller User's Guide 33
11/06 Honeywell
C300 Controller Configuration
This section includes information about creating and configuring the various function
blocks using Control Builder. Also included are procedures to create Control Modules in
which control strategies are built. The control modules then can be assigned to a CEE
block. The following topics are presented here. Click on the topic to view it.
Topic
Configuration overview
Define and add assets in your enterprise model
Specifying Time Server
C300 Controller Device Index
Create C300 Controller and CEE function blocks
Configure CEEC300 block
Configure a Secondary C300 Controller block
Convert a non-redundant C300 Controller to a redundant controller
Convert a redundant C300 Controller to a non-redundant controller
Configure IOLINK function blocks
Import/export C300 Controller configuration
Reset Device Index and IP address of a controller
Create a Control Module
Assign Control Modules and IOMs to a CEEC300 block
Copy Control Modules
Assign I/O Modules to C300 IOLINK blocks
Add an I/O Channel to a Control Module
To Next Page
Loading...
