Fixing common problems
Viewing flash log
220 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Viewing flash log
The Flash.txt log provides a list of firmware updates that have been initiated.
To view the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\bin\Flash.txt.
Viewing release information log
The ReleaseInfo.txt log provides a list of Experion software releases that have been
installed on the computer.
To view the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\bin\ReleaseInfo.txt.
Checking server point build log
The SvrPtBld.txt log provides list of process (CB) points built in the server database.
To check the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\temp\SvrPtBld.txt.
Checking server point build error log
The svrptblderr.txt log provides list of any errors associated with process (CB) points
built in the server database
To check the log, navigate to this file location on the server:
C:\Program Files\Honeywell\Experion\Engineering Tools\system\temp\svrptblderr.txt.
Checking error log
The Errlog_n.txt log provides a running list of Control Builder detected errors in
chronological order. The n represents any number that is assigned to the most recent log.
To check the log, navigate to this file location on the server:
C:\Documents and Settings\All Users\Application Data\Honeywell\Experion\Errlog_n.txt.
Fixing common problems
This section identifies some common problems and describes how you might fix them.
To Next Page
Loading...
