Honeywell Experion C300 - QVCS Tab; Server History Tab

IOLINK Block
QVCS tab
R301.1 Experion C300 Controller User's Guide 139
11/06 Honeywell
Plain Text Parameter Name
User
Configurable
Notes
Channel A+ Edges
PHYCHNPLASC1
No
Shows the Channel A
plus edges detected for
the Series C IOM.
Channel B Errors
PHYCHNERRBSC1
No
Shows the I/O Link
errors on Channel B for
the Series C IOM.
Channel B Silences
PHYCHNSILBSC1
No
Shows the I/O Link
silences on Channel B
for the Series C IOM.
Channel B- Edges
PHYCHNMNBSC1
No
Shows the Channel B
minus edges detected
for the Series C IOM.
Channel B+ Edges
PHYCHNPLBSC1
No
Shows the Channel B
plus edges detected for
the Series C IOM.
Last Error
PHYCOMMERRSC1
No
Shows the last I/O Link
communication error
experienced for the
Series C IOM.
IOM Number
PHYSDSASC1
No
Indicates the logical
address of the Series C
IOM.
QVCS tab
The QVCS tab is common to all configuration forms for tagged blocks in Control
Builder. If you have a Qualification and Version Control System (QVCS) license, this tab
shows current QVCS information for the selected C300 block. Please refer to the online
help and the Qualification and Version Control System User’s Guide for more
information about the data on this tab.
Server History tab
The Server History tab is common to all configuration forms for tagged blocks in
Control Builder. See Server History tab
for a table that summarizes the parameter data
you can monitor and configure on this tab of the configuration form for the selected
CEEC300 block