Copy Control Modules
To copy an existing Control Module
66 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Step Action Result
10
Click the Close button.
Closes dialog box and assigned
components now appear in CEE folder in
Project tab.
Copy Control Modules
Prerequisites
• Control Builder is running
• Tree windows are open
Considerations
All illustrations used in the procedure are for example purposes only.
To copy an existing Control Module
Step Action Result
1
From the Project Tree, select the
desired Control Module block to be
copied.
Selected Control Module block is
highlighted on the Project Tree.
2
Click Edit -> Copy.
Alternate method:
Click <Ctrl>-C.
Selected Control Module block is
saved to Control Builder clipboard
and Name New Function Block(s)…
dialog appears.
To Next Page
Loading...
