Activate C300 Controller’s CEE
Setting the CEE inactive
174 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Step Action
The CEE turns green on the Monitoring Tree.
• Remember that the CEE must be active for anything assigned to the CEE
to work. Even if a CM is active, it won’t do anything unless the CEE is also
active.
Alternate methods:
• Click the Toggle State toolbar button to set the selected item active.
− Select Operate -> Change State…
Setting the CEE inactive
Follow the steps in the table below to set the CEE inactive.
Step Action
1
From the Monitoring Tree, right-click the CEE.
2
Click Change State… and the following dialog appears.
To Next Page
Loading...
