C300 Controller Block
Control Confirmation tab
104 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Plain Text Parameter Name
User
Configurable
Notes
Description
No
Provides a brief description
of the entered parameter.
Control Confirmation tab
The Control Confirmation tab is common to all configuration forms for tagged blocks
in Control Builder. If you have an optional Electronic Signature license, you can
configure electronic signature information for the tagged block through this tab on the
block’s configuration form in Control Builder. Please refer to the online help and the
Server and Client Configuration Guide for information about the data on this tab.
The Electronic Signature function aligns with the identical Electronic Signatures function
that is initiated through Quick Builder and Station for Server points. When this block is
loaded to a controller, its control confirmation configuration (electronic signatures) is
also loaded to the Server. This means you can view the control confirmation configuation
for this tagged object in Station and also make changes to it. If you make changes
through Station, you must initiate an Upload or Upload with Contents function through
the Controller menu in Control Builder for the object in the Monitoring tab to
synchronize changes in the Engineering Repository Database (ERDB).
Identification tab
The Identification tab is common to all configuration forms for tagged blocks in Control
Builder. The following table summarizes the parameter data you can monitor and
configure on this tab of the configuration form for the selected C300 block.
Plain Text Parameter Name
User
Configurable
Notes
Name
Name
Yes
Unique block name
consisting of up to 16
characters to identify the
block. At least one
character in the name must
be a letter (A-Z).
Description
DESC
Yes
Descriptive text that
appears on detail and
group displays to uniquely
describe this particular
function block
Block Comment 1
BLCKCOMMENT1
Yes
Comment to be associated
To Next Page
Loading...
