R301.1 Experion C300 Controller User's Guide 1
11/06 Honeywell
About this guide
Introduction
This guide provides information that will assist you in planning and designing activities,
as well as the installation, operation, and troubleshooting of C300 Process Controllers in
an Experion system.
Intended audience
This guide is intended for the following users:
• Persons responsible for system planning, initial hardware installation, and control
strategy configuration
• Operators who help to maintain control system operations on a day-by-day basis
• Service persons responsible for routine maintenance of control hardware and who
also diagnose and repair faults.
Prerequisite skills
It is assumed that you should have some knowledge of Experion control systems and
experience of working in a Microsoft Windows environment.
Online documentation reference
Knowledge Builder is the online documentation library for the Experion system. It is
provided on a compact disc and can be installed on a suitable personal computer. If you
are using a printed copy of the C300 Controller Guide, we recommend that you install
Knowledge Builder to take advantage of its online search and reference capabilities.
Other resources and guides in Knowledge Builder provide this same information for
other Experion control hardware, such as Process Manager I/O, Series C I/O, and Series
A Chassis I/O. See Locating related documentation
for a partial listing of these
documents.
To Next Page
Loading...
Need help?
General
