Honeywell Experion C300 - I;O Status Summary Tab

IOLINK Block
I/O Status Summary tab
136 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Plain Text Parameter Name
User
Configurable
Notes
Channel B+ Edges
SECCHNPLB
No
Shows the number of
I/O link channel B
missed plus edge
transitions encountered
by the Secondary
IOP/IOM.
Last Error
SECCOMMERR
No
Indicates the last I/O
Link communication
error experienced by
the Secondary IOP.
I/O Status Summary tab
The Status Summary tab contains additional statistics for PMIO and Series C IOMs
residing on the IOLINK, which is used for maintenance and performance monitoring of
the IOLINK interface. The following table summarizes the parameter data you can
monitor and/or configure on the Status Summary tab of the configuration form for the
selected IOLINK block.
Plain Text Parameter Name
User
Configurable
Notes
IOP/IOM Number
IOP Block Name
IOPBLOCKNAME
No
Indicates the
corresponding Primary
IOP/IOM Tag.
Configured IOP Type
IOMTYPE
No
Indicates the configured
IOP type.
IOP Status
IOMSTSA and
IOMSTSB
No
Shows the status of the
specific physical I/O
Module.
Database Valid
DBVALID
No
Indicates whether the
user has validated the
IOP database
configuration.