Honeywell Experion C300 - Peer Connections Tab

C300 Controller Block
Peer Connections tab
86 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Peer Connections tab
The Peer Connections tab contains data indicating the number of peer connections for
both initiator and responder types between this C300 Controller and other peer-capable
nodes, (such as ACE, FIMs and C200 controllers). The following table summarizes the
parameter data you can monitor on the Peer Connections tab of the configuration form
for the selected C300 block.
Plain Text Parameter Name
User
Configurable
Notes
Peer Initiator Connections
Initiating to ACEs
TNUMACEINCON
No
Number of peer
connections initiating to
ACE nodes.
Initiating to C300s
TNUMC3INCON
No
Number of peer
connections initiating to
C300 nodes.
Initiating to C200s
TNUMCPMINCON
No
Number of peer
connections initiating to
C200 nodes.
Initiating to FIM4s
TNUMSCFIMINCON
No
Number of peer
connections initiating to
Series C FIM nodes.
Initiating to SIM-
C200s
TNUMSCEINCON
No
Number of peer
connections initiating to
SCE nodes.
Initiating to LIOIMs
TNUMLIOMINCON
No
Number of peer
connections initiating to
LIOIM nodes.
Peer Responding Connections
Responding to ACEs
TNUMACEOUTCON
No
Shows the number of
originator Application
Control Environments
(ACEs).
Responding to C300s
TNUMC3OUTCON
No
Shows the number of
originator C300
Controllers.