Honeywell Experion C300 - Page 154

IOLINK Block
IOTA Summary tabs
138 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
configure on the IOTA Summary tab of the configuration form for the selected IOLINK
block.
Plain Text Parameter Name
User
Configurable
Notes
IOTA
Physical Address
PHYSADDRSC(1…4)
No
Indicates the physical
address for the Series
C IOM.
Actual Module Type
PHYSMODTYPESC1
No
Indicates the physical
Series C IOM type.
IOM Status
PHYSIOPSTSSC1
No
Shows the status of the
specific physical Series
C IOM.
IOM Commands
PHYSCOMMANDSC1
No
Shows Series C IOM
Commands.
Firmware Revision
FNWREVSC1
No
Indicates the Series C
IOM Firmware revision.
Boot FW Revision
BOOTREVSC1
No
Indicates the Series C
IOM Boot Code
revision.
Hardware Revision
HDWREVSC1
No
Indicates the Series C
IOM Hardware
Revision.
Active Receive
Channel
PHYRCVCHNSC1
No
Indicates the actual
active receive channel
for the Series C IOM.
Channel A Errors
PHYCHNERRASC1
No
Shows the I/O Link
errors on Channel A for
the Series C IOM.
Channel A Silences
PHYCHNSILASC1
No
Shows the I/O Link
silences on Channel A
for the Series C IOM.
Channel A- Edges
PHYCHNMNASC1
No
Shows the Channel A
minus edges detected
for the Series C IOM.