HPE MSR3000 - Modified Feature: Telnet Redirect; Modified Feature: OSPF Performance Optimization; Feature Change Description; Command Changes

14
Modified feature: OSPF performance optimization
Feature change description
You can set a fixed OSPF SPF calculation interval in the range of 0 to 10000 milliseconds.
The value range for the LSU packet sending interval was changed to 0 to 1000 milliseconds.
Command changes
Modified command: spf-schedule-interval
Old syntax
spf-schedule-interval { maximum-interval [ minimum-interval [ incremental-interval ] ] }
New syntax
spf-schedule-interval { maximum-interval [ minimum-interval [ incremental-interval ] ] | millisecond
interval }
Views
OSPF view
Change description
The millisecond interval argument was added to the command. You can specify this argument to set
a fixed OSPF SPF calculation interval in the range of 0 to 10000 milliseconds.
Modified command: transmit-pacing
Syntax
transmit-pacing interval interval count count
Views
OSPF view
Change description
Before modification: The value range for the interval argument was 10 to 1000 milliseconds.
After modification: The value range for the interval argument is 0 to 1000 milliseconds.
Modified feature: Telnet redirect
Feature change description
Authentication was added on MSR 3000 series routers for Telnet redirect users.
Logging was added for Telnet redirect login events and Telnet redirect exit events.