58
Modified feature: Default user role
Feature change description
The default user role can be changed. The role-name argument was added to the role default-role
enable command for specifying a user role as the default user role.
Command changes
Modified command: role default-role enable
Old syntax
role default-role enable
undo role default-role enable
New syntax
role default-role enable [ role-name ]
undo role default-role enable
Views
System view
Change description
Before modification: The default user role is network-operator.
After modification: The role-name argument was added to specify any user role that exists in the
system as the default user role. The argument is a case-sensitive string of 1 to 63 characters. If you
do not specify this argument, the default user role is network-operator.
Modified feature: Debugging
Feature change description
The all keyword and the timeout time option were removed from the debugging command. You can
no longer use the command to enable debugging for all modules at the same time or automatically
disable debugging for all modules after a specific period of time.
To Next Page
Loading...
Need help?
General
