74
[SLOT 0]CELLULAR0/0 (Hardware)3.0 (Driver)1.0, (Cpld)1.0
<HPE>
Distributed devices upgrading from the CLI
You can use the TFTP or FTP commands on the router to access the TFTP or FTP server to back up
or download files.
Display the slot number of the active MPU
Perform the display device command in any view to display the slot number of the active MPU. By
default, the standby MPU will automatically synchronize the image files from active MPU.
<HPE
Slot No. Board Type Status Primary SubSlots
-----------------------------------------------------------------------------
0 MPU-100 Normal Master 0
1 MPU-
2 SPU-100 Normal N/A
<HPE>
Save the current configuration and verify the storge space
1. Perform the save command in any view to save the current configuration.
<HPE>save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[cfa0:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait...
Configuration is saved to device successfully.
<HPE>
2. Perform the dir command in user view to identify the system software image and configuration
file names and verify that the CF card has sufficient space for the new system software image.
<HPE>dir
Directory of cfa0:
0 drw- -
Jan 07 2013 14:02:12 diagfile
1 -rw- 307 Jan 22 2013 17:02:02 ifindex.dat
2 drw- -
Jan 07 2013 14:02:12 license
3 drw- - Jan 22 2013 13:42:00 logfile
4 -rw- 21412864 Jan 22 2013 16:49:00 MSR4000-cmw710-boot-
5 -rw- 1123328 Jan 22 2013 16:50:30 MSR4000-cmw710-data-
6 -rw- 11264 Jan 22 2013 16:50:26 MSR4000-cmw710-security-
7 -rw- 45056000 Jan 22 2013 16:49:34 MSR4000-cmw710-system-
8 -rw- 2746368 Jan 22 2013 16:50:26 MSR4000-cmw710-voice-
9 drw- -
Jan 07 2013 14:02:12 seclog
10 -rw-
2166 Jan 22 2013 17:02:02 startup.cfg
11 -rw-
34425 Jan 22 2013 17:02:02 startup.mdb
507492 KB total (438688 KB free)
To Next Page
Loading...
Need help?
General
