HPE MSR3000 User Manual

185
Predefined user roles
network-admin
Parameters
import single-request-file: Specifies the name of the single request file generated by CAVS.
export validation-file: Specifies a name for the validation file to be generated.
Usage guidelines
SSH gets parameters from the single request file and sends them to the key derivation module. After
the key derivation module returns the calculation result, SSH stores the calculation result in the
validation file.
Examples
# Specify ssh.req and ssh.txt as the single request file and the validation file, respectively.
<Sysname> system-view
[Sysname] probe
[Sysname-probe] fips ssh kdf import ssh.req export ssh.txt
New feature: Ignoring the first AS number of EBGP route
updates for a peer or peer group
Configuring Ignoring the first AS number of EBGP route updates for a
peer or peer group
By default, BGP checks the first AS number of a received EBGP route update. If the first AS number
is neither the AS number of the BGP peer nor a private AS number, the BGP router disconnects the
BGP session to the peer.
To ignore the first AS number of EBGP route updates for a peer or peer group:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
N/A
3. Configure BGP to ignore
the first AS number of
EBGP route updates for a
peer or peer group.
peer
{ group-name | ipv4-address
[ mask-length ] | ipv6-address
[ prefix-length ] }
ignore-first-as
By default, BGP checks the
first AS number of EBGP
route updates.

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English