HPE MSR3000 - Modified Feature: MPLS Qos Support for Marking the EXP Field; Marking the EXP Field in the Second MPLS Label; Command Reference; New Command: Remark Second-Mpls-Exp

26
Default
No criterion is defined to match the EXP field in the second MPLS label.
Views
Traffic class view
Predefined user roles
network-admin
Parameters
not: Matches packets not conforming to the specified criterion.
exp-value&<1-8>: Specifies a space-separated list of up to eight EXP values. The value range for
the exp-value argument is 0 to 7. If the same MPLS EXP value is specified multiple times, the system
considers them as one. If a packet matches one of the defined MPLS EXP values, it matches the
if-match clause.
Examples
# Define a criterion to match packets with EXP value 3 or 4 in the second MPLS label.
<Sysname> system-view
[Sysname] traffic classifier database
[Sysname-classifier-database] if-match second-mpls-exp 3 4
Modified feature: MPLS QoS support for marking the
EXP field
Marking the EXP field in the second MPLS label
In this release, MPLS QoS supports marking the EXP fields in both the topmost (first) MPLS label
and the second MPLS label.
Command reference
New command: remark second-mpls-exp
Use remark second-mpls-exp to configure an EXP value marking action for the second MPLS label
in a traffic behavior.
Use undo remark second-mpls-exp to delete the action.
Syntax
remark second-mpls-exp second-mpls-exp-value
undo remark second-mpls-exp second-mpls-exp-value
Default
No EXP value marking action for the second MPLS label is configured in a traffic behavior.