To Next Page

To Previous Page

undo tcp mac-record local

Default

The destination MAC address is recorded.

Views

System view

Default command level

network-admin

Parameters

mac-address: Specifies the MAC address of the local device. The MAC address cannot be all 0s,

broadcast MAC address, or multicast MAC address.

Usage guidelines

To make this command take effect, you must enable MAC address recording in TCP packets by

using the tcp mac-record enable command.

Examples

# Record the MAC address of the local device 0605-0403-0201 in TCP packets.

<Sysname> system-view

[Sysname] tcp mac-record local 0605-0403-0201

Release 0306P12

This release has the following changes:

Modified feature: Configuring an SSH user

Modified feature: AAA

Modified feature: Configuring a cellular interface for a 3G/4G modem

Modified feature: VXLAN

Modified feature: DHCP

Modified feature: Configuring an SSH user

Feature change description

Starting from this software version, the device checks the username validity when an SSH user is

created.

HPE MSR3000 User Manual

Questions and Answers: