HPE MSR3000 - New Feature: WAAS; Configuring WAAS; Command Reference; New Feature: Support for the MKI Field in SRTP or SRTCP Packets

218
New feature: WAAS
Configuring WAAS
This release added support for the Wide Area Application Services (WAAS) feature in the DATA
image on the following router series:
•
MSR1000.
•
MSR3000.
•
MSR4000.
Command reference
For more information about WAAS commands, see HPE FlexNetwork MSR Routers Layer 3 - IP
Services Command Reference(V7).
New feature: Support for the MKI field in SRTP or SRTCP
packets
This feature enables the router to add the MKI field to outgoing SRTP or SRTCP packets. You can
set the length of the MKI field.
Command reference
mki
Use mki to add the MKI field to outgoing SRTP or SRTCP packets and set the length of the MKI field.
Use undo mki to restore the default.
Syntax
mki mki-length
undo mki
Default
Outgoing SRTP or SRTCP packets do not carry the MKI field.
Views
SIP view