HPE MSR3000 - New Command: Display Ikev2 Proposal

84
Related commands
ikev2 profile
New command: display ikev2 proposal
Use display ikev2 proposal to display the IKEv2 proposal configuration.
Syntax
display ikev2 proposal [ name | default ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name: Specifies an IKEv2 proposal by its name, a case-insensitive string of 1 to 63 characters.
default: Specifies the default IKEv2 proposal.
Usage guidelines
This command displays IKEv2 proposals in descending order of priorities. If you do not specify any
parameters, this command displays the configuration of all IKEv2 proposals.
Examples
# Display the configuration of all IKEv2 proposals.
<Sysname> display ikev2 proposal
IKEv2 proposal: 1
Encryption: 3DES-CBC, AES-CBC-128, AES-CTR-192, CAMELLIA-CBC-128
Integrity: MD5, SHA256, AES-XCBC
PRF: MD5, SHA256, AES-XCBC
DH group: MODP1024/Group 2, MODP1536/Group 5
IKEv2 proposal: default
Encryption: AES-CBC-128, 3DES-CBC
Integrity: SHA1, MD5
PRF: SHA1, MD5
DH group: MODP1536/Group 5, MODP1024/Group 2
Table 6 Command output
Field
Description
IKEv2 proposal Name of the IKEv2 proposal.
Encryption Encryption algorithms that the IKEv2 proposal uses.
Integrity Integrity protection algorithms that the IKEv2 proposal uses.