HPE MSR3000 - New Command: Dh

90
Temporary failure: 0
No child SA: 0
Unknown other notify: 0
No enough resource: 0
Enqueue error: 0
No IKEv2 SA: 0
Packet error: 0
Other error: 0
Retransmit timeout: 0
DPD detect error: 0
Del child for IPsec message: 0
Del child for deleting IKEv2 SA: 0
Del child for receiving delete message: 0
New command: dh
Use dh to specify DH groups to be used in IKEv2 key negotiation.
Use undo group to restore the default.
Syntax
In non-FIPS mode:
dh { group1 | group14 | group2 | group24 | group5 | group19 | group20 } *
undo dh
In FIPS mode:
dh { group14 | group24 | group19 | group20 } *
undo dh
Default
No DH group is specified for an IKEv2 proposal.
Views
IKEv2 proposal view
Predefined user roles
network-admin
Parameters
group1: Uses the 768-bit Diffie-Hellman group.
group2: Uses the 1024-bit Diffie-Hellman group.
group5: Uses the 1536-bit Diffie-Hellman group.
group14: Uses the 2048-bit Diffie-Hellman group.
group24: Uses the 2048-bit Diffie-Hellman group with the 256-bit prime order subgroup.