HPE MSR3000 - Ppp Lcp Imsi String

209
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable the LNS to initiate IMSI binding authentication requests.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp imsi request
Related commands
•
ppp lcp imsi accept
•
ppp lcp imsi string
ppp lcp imsi string
Use ppp lcp imsi string imsi-info to configure the IMSI information on the client.
Use undo ppp lcp imsi string to delete the IMSI information on the client.
Syntax
ppp lcp imsi string imsi-info
undo ppp lcp imsi string
Default
The client automatically obtains the IMSI information from its SIM card.
Views
Interface view
Predefined user roles
network-admin
Parameters
string imsi-info: Specifies the IMSI information, a case-sensitive string of 1 to 31 characters.
Examples
# Configure the IMSI information as imsi1.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp imsi string imsi1
Related commands
•
ppp lcp imsi request
•
ppp lcp imsi accept