97
Default
No IKEv2 IPv4 address pools exist.
Views
System view
Predefined user roles
network-admin
Parameters
group-name: Specifies an name for the IKEv2 IPv4 address pool. The group-name argument is a
case-insensitive string of 1 to 63 characters.
start-ipv4-address end-ipv4-address: Specifies an IPv4 address range. The start-ipv4-address
argument specifies the start IPv4 address. The end-ipv4-address argument specifies the end IPv4
address.
mask: Specifies the IPv4 address mask.
mask-length: Specifies the length of the IPv4 address mask.
Usage guidelines
An IKE IPv4 address pool can contain a maximum of 8192 IPv4 addresses.
Examples
# Configure an IKEv2 IPv4 address pool with the name ipv4group, address range 1.1.1.1 to 1.1.1.2,
and the mask 255.255.255.0.
<Sysname> system-view
[Sysname] ikev2 address-group ipv4group 1.1.1.1 1.1.1.2 255.255.255.0
# Configure an IKEv2 IPv4 address pool with the name ipv4group, address range 1.1.1.1 to 1.1.1.2,
and the mask length 32.
<Sysname> system-view
[Sysname] ikev2 address-group ipv4group 1.1.1.1 1.1.1.2 32
Related commands
address-group
New command: ikev2 cookie-challenge
Use ikev2 cookie-challenge to enable the cookie challenging feature.
Use undo ikev2 cookie-challenge to disable the cookie challenging feature.
Syntax
ikev2 cookie-challenge number
undo ikev2 cookie-challenge
Default
The cookie challenging feature is disabled.
To Next Page
Loading...
