HPE MSR3000 User Manual

221
Modified feature: Setting the global link-aggregation
load-sharing mode
Feature change description
The bandwidth-usage keyword was added to the link-aggregation global load-sharing mode
command. You can set the global load-sharing mode to load share traffic based on bandwidth usage.
Command changes
Modified command: link-aggregation global load-sharing mode
Old syntax
link-aggregation global load-sharing mode { destination-ip | destination-mac |
destination-port | mpls-label1 | source-ip | source-mac | source-port } *
undo link-aggregation global load-sharing mode
New syntax
link-aggregation global load-sharing mode { bandwidth-usage | destination-ip |
destination-mac | destination-port | mpls-label1 | source-ip | source-mac | source-port } *
undo link-aggregation global load-sharing mode
Views
System view
Change description
The bandwidth-usage keyword was added. You can specify this keyword to set the global load
sharing mode to load share traffic based on bandwidth usage.
Release 0304
This release has the following changes:
New feature: Setting the RTC version
New feature: Setting the maximum size of advertisement files
New feature: IRF
New feature: Frame Relay
New feature: EVI

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English