107
# Specify HMAC-SHA1 and HMAC-MD5 as the integrity protection algorithms, with HMAC-SHA1
preferred.
[Sysname-ikev2-proposal-prop1] integrity sha1 md5
Related commands
ikev2 proposal
New command: keychain
Use keychain to specify an IKEv2 keychain for pre-shared key authentication.
Use undo keychain to restore the default.
Syntax
keychain keychain-name
undo keychain
Default
No IKEv2 keychain is specified for an IKEv2 profile.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
keychain-name: Specifies an IKEv2 keychain by its name. The keychain name is a case-insensitive
string of 1 to 63 characters and cannot contain a hyphen (-).
Usage guidelines
An IKEv2 keychain is required on both ends if either end uses pre-shared key authentication. You
can specify only one IKEv2 keychain for an IKEv2 profile.
You can specify the same IKEv2 keychain for different IKEv2 profiles.
Examples
# Create an IKEv2 profile named profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
# Specify the IKEv2 keychain keychain1.
[Sysname-ikev2-profile-profile1] keychain keychain1
Related commands
display ikev2 profile
ikev2 keychain
To Next Page
Loading...
Need help?
General
