151
<Sysname> scp ipv6 2000::1 get abc.txt suite-b 192-bit pki-domain clientpkidomain
server-pki-domain serverpkidomain
New command: scp suite-b
Use scp suite-b to establish a connection to an SCP server based on Suite B algorithms and
transfer files with the server.
Syntax
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] suite-b [ 128-bit | 192-bit ] pki-domain domain-name [ server-pki-domain
domain-name ] [ prefer-compress zlib ] [ source { interface interface-type interface-number | ip
ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 to
31 characters.
get: Downloads the file.
put: Uploads the file.
source-file-name: Specifies the name of the source file.
destination-file-name: Specifies the name of the target file. If you do not specify this argument, the
target file uses the same file name as the source file.
suite-b: Specifies the Suite B algorithms. If neither the 128-bit keyword nor the 192-bit keyword is
specified, all algorithms in Suite B are used. For more information about the Suite B algorithms, see
Table 6.
128-bit: Specifies the 128-bit Suite B security level.
192-bit: Specifies the 192-bit Suite B security level.
pki-domain domain-name: Specifies the PKI domain of the client's certificate. The domain-name
argument represents the PKI domain name, a case-insensitive string of 1 to 31 characters, excluding
the characters listed in Table 7.
To Next Page
Loading...
Need help?
General
