HPE MSR3000

234
New feature: Filtering by application layer protocol
status
Configuring Filtering by application layer protocol status
ASPF inspection supports protocol status validity check for application protocols of DNS, FTP, H323,
HTTP, SCCP, SIP, and SMTP. ASPF drops packets with invalid protocol status.
Command reference
See HPE FlexNetwork MSR Configuration Guides(V7) and HPE FlexNetwork MSR Command
References(V7).
New feature: ADVPN support for multicast forwarding
Configuring ADVPN support for multicast forwarding
After NBMA mode is enabled on an ADVPN tunnel interface, the interface forwards multicast data
only to spokes that need the data.
Command reference
See HPE FlexNetwork MSR Configuration Guides(V7) and HPE FlexNetwork MSR Command
References(V7).
New feature: MPLS LDP support for IPv6
Configuring MPLS LDP support for IPv6
LDP can operate on a pure IPv4 or IPv6 network or a network where IPv4 and IPv6 coexist. LDP
operates similarly on IPv4 and IPv6 networks.
Command reference
See HPE FlexNetwork MSR Configuration Guides(V7) and HPE FlexNetwork MSR Command
References(V7).