215
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
band-number: Specifies a band for a 4G modem. The available bands vary by modem model.
Usage guidelines
This command is supported only on the following 4G modems:
Sierra MC7354 and MC7304.
Long Sung U8300C, U8300W, and U8300.
WNC DM11-2.
Examples
# Specify band 3 for Cellular 1/0.
<Sysname> system-view
[Sysname] controller cellular 1/0
[Sysname-Controller-Cellular1/0]lte band 3
New feature: CFD
The router supports the CFD feature.
New feature: Using tunnel interfaces as OpenFlow ports
The MSR1000 routers support using tunnel interfaces as OpenFlow ports.
New feature: NETCONF support for ACL filtering
The feature enables the device to use an ACL to filter NETCONF over SOAP traffic.
Command reference
netconf soap http acl
Use netconf soap http acl to apply an ACL to NETCONF over SOAP over HTTP traffic.
Use undo netconf soap http acl to remove the application.