HPE MSR3000 - Modified Command: Scp

166
New syntax
In non-FIPS mode:
ssh user username service-type { all | netconf | scp | sftp | stelnet } authentication-type
{ password | { any | password-publickey | publickey } [ assign { pki-domain domain-name |
publickey keyname } ] }
undo ssh user username
In FIPS mode:
ssh user username service-type { all | netconf | scp | sftp | stelnet } authentication-type
{ password | password-publickey [ assign { pki-domain domain-name | publickey keyname } ] }
undo ssh user username
Views
System view
Change description
Before modification: The options assign { pki-domain domain-name | publickey keyname } are
required for verifying the client.
After modification: The options assign { pki-domain domain-name | publickey keyname } are
optional for verifying the client.
Modified command: scp
Old syntax
In non-FIPS mode:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher
{ 3des | aes128 | aes256 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 |
des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ip ip-address } ] *
In FIPS mode:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa | prefer-compress zlib | prefer-ctos-cipher { aes128 |
aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher
{ aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname | source
{ interface interface-type interface-number | ip ip-address } ] *
New syntax
In non-FIPS mode: