238
New feature: SMS-based automatic configuration
Configuring SMS-based automatic configuration
Support for SMS-based automatic configuration. With SMS-based automatic configuration, the
device can connect to an IMC server over a 3G or 4G network to obtain a configuration file.
To initiate SMS-based automatic configuration process, the administrator can use a cell phone or the
IMC server to send a short message to the device. The IMC server sends short messages to devices
through an SMS gateway. This feature can be used when the devices to be configured are widely
distributed and there are 3G or 4G networks available for wireless communication.
Command reference
See HPE FlexNetwork MSR Configuration Guides(V7) and HPE FlexNetwork MSR Command
References(V7).
New feature: ARP attack protection
Configuring ARP attack protection
None
Command reference
See HPE FlexNetwork MSR Configuration Guides(V7) and HPE FlexNetwork MSR Command
References(V7).
New feature: SIP support for VRF
Configuring SIP support for VRF
This feature enables a PE device to provide SIP services for a VPN instance. To enable this feature,
you can associate the VPN instance with SIP on the PE device. The PE device uses the interface
bound to the VPN instance as the source for sending SIP signaling and media streams.
To Next Page
Loading...
