115
Examples
# Create an IKEv2 keychain named key1 and enter IKEv2 keychain view.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
Related commands
address
hostname
identity
ikev2 keychain
New command: pre-shared-key
Use pre-shared-key to configure a pre-shared key.
Use undo pre-shared-key to delete a pre-shared key.
Syntax
pre-shared-key [ local | remote ] { ciphertext | plaintext } string
undo pre-shared-key [ local | remote ]
Default
No pre-shared key exists.
Views
IKEv2 peer view
Predefined user roles
network-admin
Parameters
local: Specifies a pre-shared key for certificate signing.
remote: Specifies a pre-shared key for certificate authentication.
ciphertext: Specifies a pre-shared key in encrypted form.
plaintext: Specifies a pre-shared key in plaintext form. For security purposes, the key specified in
plaintext form will be stored in encrypted form.
string: Specifies the pre-shared key. The key is case sensitive. In non-FIPS mode, its plaintext form
is a string of 1 to 128 characters and its encrypted form is a string of 1 to 201 characters. In FIPS
mode, its plaintext form is a string of 15 to 128 characters and its encrypted form is a string of 15 to
201 characters.
To Next Page
Loading...
Need help?
General
