212
ppp user accept-format imsi-sn split
Use ppp user accept-format imsi-sn split splitchart to configure the separator for the received
authentication information.
Use undo ppp user accept-format to restore the default.
Syntax
ppp user accept-format imsi-sn split splitchart
undo ppp user accept-format
Default
No separator is configured for the received authentication information.
Views
Interface view
Predefined user roles
network-admin
Parameters
splitchart: Specifies the separator. The separator contains one character, and it can be a letter, a digit,
or any sign other than the at sign (@), slash (/), and backslash (\).
Usage guidelines
By default, the authentication information contains only the client username. If you include the IMSI
or SN information in the authentication information, you need to configure the separator to separate
different types of information.
If no IMSI/SN information is received from the peer during the authentication process,
the IMSI/SN
information split from the received authentication information is used.
Examples
# Configure the pound sign (#) as the separator for the authentication information.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user accept-format imsi-sn split #
Related commands
ppp lcp sn request
ppp lcp imsi request
ppp lcp sn accept
ppp lcp imsi accept
To Next Page
Loading...
