HPE MSR3000 - Import-Route (RIP View); Ip Route-Static Fast-Reroute Auto

250
Views
RIB IPv4 address family view, RIB IPv6 address family view
Predefined user roles
network-admin
Examples
# Enable NSR for the RIB IPv4 address family.
<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv4
[Sysname-rib-ipv4] non-stop-routing
ip route-static fast-reroute auto
Use ip route-static fast-reroute auto to configure static route FRR to automatically select a backup
next hop.
Use undo ip route-static fast-reroute auto to disable static route FRR.
Syntax
ip route-static fast-reroute auto
undo ip route-static fast-reroute auto
Default
Static route FRR is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Configure static route FRR to automatically select a backup next hop.
<Sysname> system-view
[Sysname] ip route-static fast-reroute auto
import-route (RIP view)
Use import-route to enable route redistribution from another routing protocol.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ allow-direct | cost cost |
route-policy route-policy-name | tag tag ] *