HPE MSR3000 User Manual

56
Predefined user roles
network-admin
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command clears mGRE session statistics for all
mGRE tunnel interfaces.
peer ipv4-address: Specifies a peer public address. If you do not specify this option, the command
clears statistics about all mGRE sessions on the specified mGRE tunnel interface.
Examples
# Clear statistics about mGRE sessions on interface Tunnel1.
<Sysname> reset mgre statistics interface tunnel 1
# Clear statistics about the mGRE session with peer public address 192.168.1.200 on interface
Tunnel1.
<Sysname> reset mgre statistics interface tunnel 1 peer 192.168.1.200
New command: reset nhrp statistics
Use reset nhrp statistics to clear NHRP packet statistics.
Syntax
reset nhrp statistics [ interface tunnel interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command clears NHRP packet statistics for all
mGRE tunnel interfaces.
Examples
# Clear NHRP packet statistics for interface Tunnel1.
<Sysname> reset nhrp statistics interface tunnel 1
Related commands
display nhrp statistics

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English