HPE MSR3000

226
Modified feature: Displaying information about NTP
servers from the reference source to the primary NTP
server
Feature change description
The source interface-type interface-number option was added to the display ntp-service trace
command.
Command changes
Modified command: display ntp-service trace
Old syntax
dot1x ead-assistant url url-string
New syntax
display ntp-service trace [ source interface-type interface-number ]
Views
Any view
Change description
The source interface-type interface-number option was added to the display ntp-service trace
command.
Modified feature: Saving, rolling back, and loading the
configuration
Feature change description
The following configuration guidelines were added when you use NETCONF to save, roll back, or
load the configuration:
•
The save, rollback, and load operations supplement NETCONF requests. Performing the
operations might consume a lot of system resources.