75
<HPE>
Download the image file to the router
Using TFTP
Perform the tftp get command in user view to download the system software image file, for example,
msr4000.ipe to the CF card on the router.
<HPE>tftp 192.168.1.100 get msr4000.ipe
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
45 67.0M 45 30.4M 0 0 792k 0 0:01:26 0:00:39 0:00:47 844k
100 67.0M 100 67.0M 0 0 772k 0 0:01:28 0:01:28 --:--:-- 745k
<HPE>
Using FTP
1. Perform the get command in FTP client view to download the system software image file
msr4000.ipe to the CF card on the router.
ftp> get msr4000.ipe
msr4000.ipe already exists. Overwrite it? [Y/N]:y
227 Entering passive mode (192,168,1,100,5,20)
125 Using existing data connection
226 Closing data connection; File transfer successful.
37691392 bytes received in 17.7 seconds (2.03 Mbyte/s)
[ftp]
2. Perform the quit command in FTP client view to return to user view.
[ftp]quit
221 Service closing control connection
<HPE>
Copy the image file to CF card root directory of the standby MPU
<HPE> copy msr4000.ipe slot1#cfa0:/
Copy cfa0:/msr4000.ipe to slot1#cfa0:/msr4000.ipe?[Y/N]:y
Copying file cfa0:/msr4000.ipe to slot1#cfa0:/ msr4000.ipe...Done.
Specifying the startup image file
1. Perform the boot-loader command in user view to d specify the msr4000.ipe file as the main
image file for the active MPU on slot 0 at the next reboot.
<HPE>boot-loader file flash:/msr4000.ipe slot 0 main
Images in IPE:
msr4000-cmw710-boot-a0005.bin
msr4000-cmw710-system-a0005.bin
msr4000-cmw710-security-a0005.bin
msr4000-cmw710-voice-a0005.bin
msr4000-cmw710-data-a0005.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to the device.
To Next Page
Loading...
Need help?
General
