198
encapsulated by ESP in transport mode and on original IP packets encapsulated by ESP in tunnel
mode.
Examples
# Enable TFC padding for the IPsec policy policy1.
<Sysname> system-view
[Sysname] ipsec policy policy1 10 isakmp
[Sysname-ipsec-policy-isakmp-policy1-10] tfc enable
Related commands
display ipsec ipv6-policy
display ipsec policy
Modified command: public-key local create
Old syntax
public-key local create { dsa | ecdsa | rsa } [ name key-name ]
New syntax
public-key local create { dsa | ecdsa [ secp192r1 | secp256r1 | secp384r1 ] | rsa } [ name
key-name ]
Views
System view
Change description
The following keywords were added:
secp192r1: Uses the secp192r1 curve to create a 192-bit ECDSA key pair. The secp192r1
curve is used by default.
secp256r1: Uses the secp256r1 curve to create a 256-bit ECDSA key pair.
secp384r1: Uses the secp384r1 curve to create a 384-bit ECDSA key pair.
Modified command: public-key ecdsa
Old syntax
public-key ecdsa name key-name
New syntax
public-key ecdsa name key-name [ secp192r1 | secp256r1 | secp384r1 ]
Views
PKI domain view
Change description
The following keywords were added:
To Next Page
Loading...
Need help?
General
