HPE MSR3000

81
Invalid hash information: 0
Unsupported attribute: 0
Unsupported certificate type: 0
Invalid certificate authority: 0
Invalid signature: 0
Unsupported exchange type: 0
No available SA: 0
Retransmit timeout: 0
Not enough memory: 0
Enqueue fails: 0
New command: display ikev2 policy
Use display ikev2 policy to display the IKEv2 policy configuration.
Syntax
display ikev2 policy [ policy-name | default ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an IKEv2 policy by its name, a case-insensitive string of 1 to 63 characters.
default: Specifies the default IKEv2 policy.
Usage guidelines
If you do not specify any parameters, this command displays the configuration of all IKEv2 policies.
Examples
# Display the configuration of all IKEv2 policies.
<Sysname> display ikev2 policy
IKEv2 policy: 1
Priority: 100
Match local address: 1.1.1.1
Match local address ipv6: 1:1::1:1
Match VRF: vpn1
Proposal: 1
Proposal: 2
IKEv2 policy: default
Match local address: Any
Match VRF: Any
Proposal: default