45
201508060025
Symptom: The settings of MP-group interfaces are incompatible after an MSR router is
upgraded to E0302P06 or a later version.
Condition: This symptom occurs if an MSR router is upgraded to E0302P06 or a later version.
201507080421
Symptom: The display qos policy interface command outputs incorrect statistics.
Condition: This symptom might occur if MPLS forwarding, PPP IP header compression, and
QoS CBQ are enabled on PPP interfaces of the router.
201506050279
Symptom: A POS transaction fails if it has multiple interaction messages.
Condition: This symptom might occur if the following conditions exist:
POS terminal access is enabled on the router.
The background process of POS transactions requires that the messages of a transaction
must have the same source TPDU.
201506030302
Symptom: Memory leakage occurs when the router is sending NetStream data packets.
Condition: This symptom might occur if NetStream is enabled on the router.
201507200403
Symptom: In the RADIUS packets that the router sends, '\000' is incorrectly added to the
NAS-ID attribute.
Condition: This symptom might occur if RADIUS authentication is configured on the router.
Resolved problems in CMW710-R0304P04
201501200401
Symptom: RBAC cannot control access to the content filtering feature.
Condition: None.
201503020376
Symptom: Packets are dropped after a BGP GR process is completed.
Condition: This symptom occurs if both BFD and GR are enabled for BGP.
201507170124
Symptom: The MPLS ILM entry is not updated after the traffic processing unit is changed for an
outgoing interface.
Condition: This symptom occurs if the traffic processing unit is changed for an outgoing
interface.
201504190023
Symptom: The BGP process on the PE is stuck.
Condition: This symptom occurs if the following conditions exist:
There is a large number of routes and many types of traffic.
The PE runs for a long time.
To Next Page