213
ppp user attach-format imsi-sn split
Use ppp user attach-format imsi-sn split splitchart to configure the separator for the sent
authentication information.
Use undo ppp user attach-format to restore the default.
Syntax
ppp user attach-format imsi-sn split splitchart
undo ppp user attach-format
Default
No separator is configured for the sent authentication information.
Views
Interface view
Predefined user roles
network-admin
Parameters
splitchart: Specifies the separator. The separator contains one character, and it can be a letter, a digit,
or any sign other than the at sign (@), slash (/), and backslash (\).
Usage guidelines
By default, the authentication information contains only the client username. If you include the IMSI
or SN information in the authentication information, you need to configure the separator to separate
different types of information.
Examples
# Configure the pound sign (#) as the separator for the sent authentication information.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user attach-format imsi-sn split #
Related commands
ppp lcp sn request
ppp lcp imsi request
ppp lcp sn accept
ppp lcp imsi accept
ppp user replace
Use ppp user replace to replace the client username with the IMSI or SN information for
authentication.
To Next Page
Loading...
Need help?
General
