HPE MSR3000 User Manual

119
Syntax
priority priority
undo priority
Default
The priority of an IKEv2 profile is 100.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
priority: Specifies the priority of the IKEv2 profile, in the range of 1 to 65535. A smaller number
represents a higher priority.
Usage guidelines
The priority set by this command can only be used to adjust the match order of IKEv2 profiles.
Examples
# Set the priority to 10 for the IKEv2 profile profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
[Sysname-ikev2-profile-profile1] priority 10
New command: proposal
Use proposal to specify an IKEv2 proposal for an IKEv2 policy.
Use undo proposal to remove an IKEv2 proposal from an IKEv2 policy.
Syntax
proposal proposal-name
undo proposal proposal-name
Default
No IKEv2 proposal is specified for an IKEv2 policy.
Views
IKEv2 policy view
Predefined user roles
network-admin
Parameters
proposal-name: Specifies an IKEv2 proposal by its name, a case-insensitive string of 1 to 63
characters.

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English