HPE MSR3000 User Manual

85
Field
Description
PRF PRF algorithms that the IKEv2 proposal uses.
DH group DH groups that the IKEv2 proposal uses.
Related commands
ikev2 proposal
New command: display ikev2 sa
Use display ikev2 sa to display the IKEv2 SA information.
Syntax
display ikev2 sa [ { count | local | remote } { ipv4-address | ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ] ] [ verbose [ tunnel tunnel-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
count：Displays the number of IKEv2 SAs.
local: Displays IKEv2 SA information for a local IP address.
remote: Displays IKEv2 SA information for a remote IP address.
ipv4-address: Specifies a local or remote IPv4 address.
ipv6 ipv6-address: Specifies a local or remote IPv6 address.
vpn-instance vpn-instance-name: Displays information about the IKEv2 SAs in an MPLS L3VPN
instance. The vpn-instance-name argument represents the VPN instance name, a case-sensitive
string of 1 to 31 characters. If you do not specify a VPN instance, this command displays information
about IKEv2 SAs for the public network.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
the summary information.
tunnel tunnel-id: Displays detailed IKEv2 SA information for an IPsec tunnel. The tunnel-id argument
specifies an IPsec tunnel by its ID in the range of 1 to 2000000000.
Usage guidelines
If you do not specify any parameters, this command displays summary information about all IKEv2
SAs.

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English